Ultrasonic Level Meter with GPS system

1,Control fuel consumption 2,Test fuel level 3,Detect the amount of dispensed fuel 4,Measure fuel consumption rate

Ultrasonic fuel level measurement for fuel consumption control fuel tank level sensor  

   

Introduction:

Ultrasonic fuellevel meter is used for fuel level measurement in vehicle fuel tanks in order to control fuel consumption. 

The measurements are realized by the ultrasonic radiator installed directly on the external bottom part of the fuel tank and data processing box. 

The ultrasonic fuel level meter can measure levels of diesel and petrol or other liquid materials depending on software settings.

Application:

ULM-0.8 measures changing level of any liquid (diesel, gasoline, water, liquefied gas, milk etc.) in moving and fixed tanks (vehicles fuel tanks, fuel tank tracks, railway tank cars, industrial tanks and liquid storages). 

The measurement is provided through the tank bottom so no damage and drilling of the tank are needed. 

The measured data could be: 

•saved in the internal memory which capacity is enough for 1 month autonomic work 

•sent via a transceiver such as GPRS modem or GPS/ GPRS tracker in real time.

Using ULM-0.8,  you can get the following important information: 

-Fuel level and amount in the tank

-Amount of dispensed fuel

-Fuel consumption rate

-Theft detection

-Operational and statistical reports

Principle of Operation:

Receiving the measured data (application 1)

           

Receiving the measured data (application 2):

  

Graph of Fuel Level Changes on Common Condition:

Graph of Fuel Level Changes on Unnormal Condition:

Complete Set:

1. Data processing box (1 PCS)

2. Ultrasonic radiator with cable 1 meter (1 pcs)

3. Extension cable6meter (1 pcs)

4. Fuse-holder(2 pcs.)

5. 1A Fuse(2 pcs.)

6. Interface cable 1meter (1 pcs)

7. 3M double side scotch for processing box fixation (1 pcs)

8. Cable yokes (4pcs)

9. Screws for processing box fixation (4 pcs)

10. Covers(4pcs)

11. User’s manual

12. Metal yokes for fixation the cable of the ultrasonic radiator (4 pcs).

13. Seal labels (2 pcs)

Technical Characteristics:

Power supply voltage	9...36V
Power protection up to	80V
Measurement range	18 –800mm(optional up to1000mm)
Max load current of outputs	10 mA
Max current consumption	80 mA
Analog interface(0 …1023)	0,3....9,7 V
Frequency output interface (U=10V)	500-1500 Hz
Quantity of outputs EIA 485	1
Quantity of outputs EIA 485/2321	1
Accuracy of fuel level measurement in static	not more      0.5 %
Accuracy of fuel level measurement in dynamic	not more      3.0 %
Accuracy of fuel level measurement	not more 3.0 %
Degree of the radiator protection	IP67
Working temperature	-40...+80 °C
Nonvolatile memory	2 MB(30 days if record once in 30 sec.)
Galvanic isolation of the power supply	yes
Galvanic isolation of the outputs	yes
Patent	yes
Guarantee	1 year

Ultrasonic Level Meter with GPS system